Home > Accessories > Wake >

Ronix Wake Shaper - WSS - Hollow Concave 205 D.A. Velcro w/1" & 2" Boat Shims
Ronix Wake Shaper - WSS - Hollow Concave 205 D.A. Velcro w/1" & 2" Boat Shims

Alternative Views:

Our Price: $599.99

Availability:: Usually Ships in 2 to 3 Days
Product Code: 46-0105

Description Technical Specs


The hottest product to hit wakesurfing since we created the wakesurfer. This device easily mounts to the lower/back point of the starboard or port side of your boat hull for a premier surf wake on either side. We have tested every aspect of surfing using- waterski boats, crossover boats, older V-Drives, newer V-Drives, and one thing is constant, this is a game changer. In addition to turning wakes into swells – the best part is you no longer have to weight your boat unevenly. Gone are the days of filling and draining your bags to the port or starboard side – keep it all in the center. There has never been this type of aftermarket innovation that can so easily be mounted to the side of the hull – that makes this kind of difference. With a built in handle it is easy to move to either side of your boat, and is best paired with a loaded Eight.3 ballast system

  • Introducing:


  • The pinnacle of displacing water – nothing remotely compares to

  • moving water mass like this with a deflection area 3 times greater than
  • most other products out there. Not only will you experience the
  • cleanest, tallest, thickest wave – but you will also notice the degree
  • of angle of the wave itself changes quite significantly giving you more
  • surf-able wave to ride on. Works with any boat step hull in a boat with
  • our removable shims to make a flush mounting area. Whoever came up with
  • the phrase less is more hasn’t used this latest design. The
  • biggest/cleanest wake regardless of the size of your boat. If your boat
  • has enough room to apply the 19.5” long running surface using our shims –
  • there is no reason to not use this version


  • The shim is a simple attachment between the Wakesurf Shaper and a

  • boat’s hull. Every hull shape is different – some are mostly flat and
  • don’t require a shim. Others have a step hull and require a 1” shim –
  • other boats have a more pronounced step and need a 2” shim, while in
  • some cases you might need both shims to make a 3” gap between the hull
  • and your Wakesurf Shaper. For installation – we recommend the Wakesurf
  • Shaper is 80% subgmerged when boat is properly weighted and as close to
  • the stern as your hull will allow.


  • The adhesive fastener strips that attach to the boat are

  • intentionally 6” longer than the Wakesurf shaper. This allows for
  • further adjustment towards the bow or the stern of the boat greatly
  • altering the shape of the wake. When closer to the stern, the wake
  • becomes steeper, and deeper – closer towards the bow and the wake gets a
  • longer sweet spot – who says you can’t surf tandem?


  • Every Wakesurf Shaper model has a concave thru the center with a

  • greater, more defined leading edge. The result – more effective job of
  • diverting a column of water creating less drag on the boat with improved
  • fuel efficiency than last year’s model. Designed for the surfer that
  • wants the biggest inboard swell.

Share your knowledge of this product. Be the first to write a review »